Requirements:

   80286 or better
   DOS 6.0 or better
   74K RAM
   85K hard drive space available
   VGA monitor or better

ABOUT OPSMTRIG:

      OPSMTRIG is a computer assisted circuit design program for the design
   of opamp based schmitt trigger circits.  There are many circuits in 
   electronics that are a standard configuration.  The only difference is the
   component values, which are variable depending on what is required of the
   circuit.  Knowledge of the many electronic math formulas are required to
   get the component values right for the desired output of these standard
   circuit configurations. It can take hours, days, even weeks of plugging
   numbers into these formulas to get the right component values.  Then the
   component values have to be rounded to the standard values available on
   the market.Sometimes a prototype of the circuit must be built (especially
   if all the formulas are not known) and then troubleshot to get the right
   component values.  OPSMTRIG eliminates all these problems.  OPSMTRIG does
   all the head work, knows all the formulas, and selects component values
   that are available on the market.  The electronics hobbyist's dream come
   true!